MPLS-TP LSP commands are only supported on 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-T (network mode).
config
- router
- [no] mpls
- [no] lsp lsp-name [bypass-only | mpls-tp src-tunnel-num]
- [no] protect-tp-path
- in-label in-label
- lsp-num lsp-number
- no lsp-num
- [no] mep
- bfd-enable [bfd-mode]
- no bfd-enable
- oam-template [32 chars max]
- no oam-template
- protection-template [256 chars max]
- no protection-template
- [no] shutdown
- out-label out-label out-link if-name [next-hop ip-address]
- no out-label
- [no] shutdown
- [no] working-tp-path
- in-label in-label
- lsp-num lsp-number
- no lsp-num
- [no] mep
- bfd-enable [bfd-mode]
- no bfd-enable
- oam-template name
- no oam-template
- [no] shutdown
- out-label out-label out-link if-name [next-hop ip-address]
- no out-label
- [no] shutdown