saa-test [test-name [owner test-owner]]
clear
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears the SAA results for the latest and the history for this test. If the test name is omitted, all the results for all tests are cleared.
Specifies the name of the SAA test. The test name must already be configured in the config>saa>test context.
Specifies the owner of an SAA operation up to 32 characters.
session session-name {dmm | slm | twamp-light}
clear>oam-pm
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears the raw measurement interval for the specified session and test.
Specifies the name of the session, 32 characters maximum.
Clears the raw measurement interval for DMM tests.
Clears the raw measurement interval for SLM tests.
Clears the raw measurement interval for TWAMP Light tests.
mep mep-id domain md-index association ma-index statistics
clear>eth-cfm
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears the specified MEP.
Specifies the MEP ID.
Specifies the domain context for the MEP.
Specifies the association context for the MEP.
Clears MEP statistics for the specified MEP.
statistics
clear>eth-cfm
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears the ETH-CFM statistics counters.
test-oam
clear
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears the Operations, Administration, and Maintenance test parameters.
twamp
clear>test-oam
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
Commands in this context clear TWAMP server statistics.
server
clear>test-oam>twamp
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears TWAMP server statistics.
testhead
clear
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
Commands in this context clear teasthead statistics.
result [test-name] [owner test-owner]
result testhead-profile profile-id
clear>testhead
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode
This command clears testhead results from the latest history for the test.
Specifies the name of the test.
Specifies the owner of a testhead operation.
Clears the testhead profile ID to use with this run/session of testhead invocation.