service
tools>dump
Supported on all 7210 SAS platforms as described in this document
This command configures tools to display service dump information.
base-stats [clear]
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays internal service statistics.
Clears stats after reading.
dpipe service-id
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays debug information for a specified service.
Specifies the service ID.
dtls service-id
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays TLS service statistics.
Specifies the service ID.
iom-stats [clear]
tools>dump>service
Supported on all 7210 SAS platforms as described in this document
This command displays IOM message statistics.
Clears the statistics after reading.
l2pt-diags
l2pt-diags clear
l2pt-diags detail
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays L2pt diagnostics.
Clears the diagnostics after reading.
Displays detailed information.
A:ALA-48>tools>dump>service# l2pt-diags
[ l2pt/bpdu error diagnostics ]
Error Name | Occurence | Event log
-----------------+-------------+-----------------------------
[ l2pt/bpdu forwarding diagnostics ]
Rx Frames | Tx Frames | Frame Type
------------+-------------+----------------------------------
A:ALA-48>tools>dump>service#
A:ALA-48>tools>dump>service# l2pt-diags detail
[ l2pt/bpdu error diagnostics ]
Error Name | Occurence | Event log
-----------------+-------------+-----------------------------
[ l2pt/bpdu forwarding diagnostics ]
Rx Frames | Tx Frames | Frame Type
------------+-------------+----------------------------------
[ l2pt/bpdu config diagnostics ]
WARNING - service 700 has l2pt termination enabled on all access points :
consider translating further down the chain or turning it off.
WARNING - service 800 has l2pt termination enabled on all access points :
consider translating further down the chain or turning it off.
WARNING - service 9000 has l2pt termination enabled on all access points :
consider translating further down the chain or turning it off.
WARNING - service 32806 has l2pt termination enabled on all access points :
consider translating further down the chain or turning it off.
WARNING - service 90001 has l2pt termination enabled on all access points :
consider translating further down the chain or turning it off.
A:ALA-48>tools>dump>service#
vpls-fdb-stats [clear]
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays VPLS FDB statistics.
Clears the statistics after reading.
vpls-mfib-stats [clear]
tools>dump>service
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the access-uplink operating mode.
This command displays VPLS MFIB statistics.
Clears statistics after reading.