The port command associates a port to a mirror source. The port is identified by the port ID. The defined port can be Ethernet or a Link Aggregation Group (LAG) ID. When a LAG ID is specified as the port ID, mirroring is enabled on all ports making up the LAG.
Mirror sources can be ports in either access or network mode. Port mirroring is supported in the combinations described in the following table.
| Port type | Port mode | Port encapsulation type |
|---|---|---|
faste/gige/10gige |
access |
null, dot1q and QinQ |
faste/gige/10gige |
access uplink |
qinq |
faste/gige/10gige |
network |
null/dot1q |
faste/gige/10gige |
hybrid |
null/dot1q/qinq |
debug>mirror-source# port {port-id|lag lag-id}{[egress][ingress]}
*A:ALA-A>debug>mirror-source# port 1/1/2 ingress egress