ip ip-filter-id [entry entry-id] [ingress | egress]
clear>filter
Supported on all 7210 SAS platforms as described in this document
This command clears the counters associated with the IP filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters are cleared can be narrowed using the command line parameters.
Specifies the IP filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be cleared.
Specifies to only clear the ingress counters.
Specifies to only clear the egress counters.
ipv6 ip-filter-id [entry entry-id] [ingress | egress]
clear>filter
Supported on all 7210 SAS platforms as described in this document
This command clears the counters associated with the IPv6 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters are cleared can be narrowed using the command line parameters.
Specifies the IP filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be cleared.
Specifies to only clear the ingress counters.
Specifies to only clear the egress counters.
mac mac-filter-id [entry entry-id] [ingress | egress]
clear>filter
Supported on all 7210 SAS platforms as described in this document
This command clears the counters associated with the MAC filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters are cleared can be narrowed using the command line parameters.
Specifies the MAC filter policy ID.
Specifies that only the counters associated with the specified filter policy entry will be cleared.
Specifies to only clear the ingress counters.
Specifies to only clear the egress counters.