To access a specific IP filter, you must specify the filter ID. Use the no form of this command to remove the command parameters or return the parameter to the default setting.
config>filter>ip-filter# description "New IP filter info"
config>filter>ip-filter# entry 2 create
config>filter>ip-filter>entry$ description "new entry"
config>filter>ip-filter>entry# action drop
config>filter>ip-filter>entry# match dst-ip 10.10.10.104/32
config>filter>ip-filter>entry# exit
config>filter>ip-filter#
The following is a sample of the modified IP filter output.
A:ALA-7>config>filter# info
----------------------------------------------
...
ip-filter 11 create
description "New IP filter info"
scope exclusive
entry 1 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action
drop
exit
entry 2 create
description "new entry"
match
dst-ip 10.10.10.104/32
exit
action
drop
exit
entry 10 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.0.100/24
exit
action
drop
exit
entry 15 create
description "no-91"
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.103/24
exit
action
forward
exit
entry 30 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.0.200/24
exit
action
forward
exit
exit
..
----------------------------------------------
A:ALA-7>config>filter#