delta-in-use-limit in-use-priority-limit
no delta-in-use-limit
config>vrrp>policy
Supported on all 7210 SAS platforms as described in this document
This command configures a lower limit on the virtual router in-use priority that can be derived from the delta priority control events.
Each vrrp-priority-id places limits on the delta priority control events to define the in-use priority of the virtual router instance. Setting this limit prevents the sum of the delta priority events from lowering the in-use priority value of the associated virtual router instances below the configured value.
The limit has no effect on explicit priority control events. Explicit priority control events are controlled by setting the in-use priority to any value between 1 and 254.
Only non-owner virtual router instances can be associated with VRRP priority control policies and their priority control events.
When the total sum of all delta events is calculated and subtracted from the base priority of the virtual router instance, the result is compared to the delta-in-use-limit value. If the result is less than the limit, the delta-in-use-limit value is used as the virtual router in-use priority value. If an explicit priority control event overrides the delta priority control events, the delta-in-use-limit has no effect.
Setting the limit to a higher value than the default limits the effect of the delta priority control events on the virtual router instance base priority value. This allows for multiple priority control events while minimizing the overall effect on the in-use priority.
Changing the in-use-priority-limit causes an immediate re-evaluation of the in-use priority values for all virtual router instances associated with this vrrp-policy-id based on the current sum of all active delta control policy events.
The no form of this command reverts to the default value.
1
Specifies the lower limit of the in-use priority base, as modified by priority control policies. The limit has the same range as the non-owner virtual router instance base-priority parameter. If the result of the total delta priority control events minus the virtual router instances base-priority is less than the in-use-priority-limit, the in-use-priority-limit value is used as the virtual router instances in-use priority value.
Setting the in-use-priority-limit to a value equal to or larger than the virtual router instance base-priority prevents the delta priority control events from having any effect on the virtual router instance in-use priority value.
description string
no description
config>vrrp>policy
Supported on all 7210 SAS platforms as described in this document
This command creates a text description for a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
Specifies the description character string. Allowed values are any string up to 80 characters composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
policy policy-id [context service-id]
no policy policy-id
config>vrrp
Supported on all 7210 SAS platforms as described in this document
This command configures a VRRP priority control policy which is used to control the VRRP in-use priority based on priority control events. It is a parental node for the various VRRP priority control policy commands that define the policy parameters and priority event conditions.
The virtual router instance priority command defines the initial or base value to be used by non-owner virtual routers. This value can be modified by assigning a VRRP priority control policy to the virtual router instance. The VRRP priority control policy can override or diminish the base priority setting to establish the actual in-use priority of the virtual router instance.
The policy policy-id command must be created first, before it can be associated with a virtual router instance.
Because VRRP priority control policies define conditions and events that must be maintained, they can be resource intensive. The number of policies is limited to 1000.
The policy-id do not have to be consecutive integers. The range of available policy identifiers is from 1 to 9999.
The no form of this command deletes the specific policy-id from the system. The policy-id must be removed first from all virtual router instances before the no policy command can be issued. If the policy-id is associated with a virtual router instance, the command will fail.
Specifies the VRRP priority control ID, expressed as a decimal integer, that uniquely identifies this policy from any other VRRP priority control policy defined on the system. Up to 1000 policies can be defined.
Specifies the service ID to which this policy applies. A value of zero (0) means that this policy does not apply to a service but applies to the base router instance.
[no] priority-event
config>vrrp>policy
Supported on all 7210 SAS platforms as described in this document
This command configures VRRP priority control events used to define criteria to modify the VRRP in-use priority.
A priority control event specifies an object to monitor and the effect on the in-use priority level for an associated virtual router instance.
Up to 32 priority control events can be configured within the priority-event node.
The no form of this command clears any configured priority events.