Router commands

config
    - router [router-name]
        - aggregate ip-prefix/ip-prefix-length [summary-only] blackhole
        - no aggregate ip-prefix/ip-prefix-length
        - autonomous-system autonomous-system
        - no autonomous-system
        - ecmp max-ecmp-routes
        - no ecmp
        - mpls-labels
            - static-label-range static-range
            - no static-label-range
            - sr-labels start start-value end end-value
            - no sr-labels
        - router-id ip-address
        - no router-id 
        - sgt-qos           (See Note below)
            - application dscp-app-name dscp {dscp-value | dscp-name
            - application dot1p-app-name dot1p dot1p-priority
            - no application 
            - dscp dscp-name fc fc-name 
            - no dscp dscp-name 
        - [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference] [metric metric] [tag tag] [enable | disable] next-hop gateway [bfd-enable] [{cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]}] [ldp-sync]
        - [no] static-route {ip-prefix/prefix-length|ip-prefix netmask} [preference preference] [metric metric] [tag tag] [enable|disable] indirect ip-address [{cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]}]
        - [no] static-route {ip-prefix/prefix-length|ip-prefix netmask} [preference preference] [metric metric] [enable|disable] black-hole
        - [no]static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference][metric metric] [enable | disable] indirect ip-address {prefix-list prefixlist-name [all | none]}
        -  [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference][metric metric] [tag tag] [enable | disable] next-hop ip-int-name | ip-address{prefix-list prefix-list-name [all | none]}
        -  [no] static-route {ip-prefix/prefix-length | ip-prefix netmask} [preference preference][metric metric] [tag tag] [enable | disable] black-hole {prefix-list prefix-listname [all | none]}
        - [no] triggered-policy
Note:

For information about the self-generating traffic remarking sgt-qos commands, refer to the ‟Self-Generated Traffic Commands (for 7210 SAS-Mxp)” section in the 7210 SAS-Mxp, R6, R12, S, Sx, T Quality of Service Guide.