Show commands

show 
    - router router-instance
        - aggregate [family] [active]
        - arp [ip-int-name | ip-address/mask | mac ieee-msac-address | summary] [local | dynamic | static | managed]
        - bfd
            - bfd-template template-name
            - interface [interface-name] [family] detail
            - interface summary
            - session [src ip-address [dst ip-address] | [detail][ipv4]]
            - session [type  type] [ipv4]
            - session [summary]
            - session lsp-name lsp Name [link-type {cc-only|cc-cv}] detail
        - dhcp
            - statistics [interface ip-int-name | ip-address]
            - summary 
        - ecmp
        - fib slot-number [ip-prefix/prefix-length [longer]] 
        - interface [{[ip-address | ip-int-name] [detail]} | [summary] 
        - interface [ip-address | ip-int-name] [detail]
        - interface [ip-address | ip-int-name] 
        - icmp6
            - interface [interface-name]
        - interface [{[ip-address | ip-int-name] [detail] [family]} | [summary] | [exclude-services]
        - interface [family] [detail]
        - interface ip-address | ip-int-name> statistics
        - neighbor [family] [ip-address | ip-int-name | mac ieee-mac-address | summary] [dynamic|static|managed]
        - policy [name | prefix-list [name] | admin]
        - route-table [family] [ip-prefix [prefix-length] [longer|exact]| [protocol protocol-name | [summary]
        - rtr-advertisement [interface interface-name] [prefix ipv6-prefix[/prefix-length] [conflicts]
        - sgt-qos           (See Note below) 
            - application [app-name] [dscp | dot1p] 
            - dscp-map [dscp-name] 
        - static-arp [ip-address | ip-int-name | mac ieee-mac-addr]
        - static-route [family] [[ip-prefix /mask] [ip-prefix /prefix-length] | [preference preference] | [next-hop ip-address| tag tag] | [detail]
        - status
        - tunnel-table [ip-address[/mask]] | [protocol protocol | sdp sdp-id] [summary]
Note:

For information about the self-generating traffic remarking sgt-qos commands, refer to the ‟Self-Generated Traffic Commands (for 7210 SAS-Mxp” section in the 7210 SAS-Mxp, R6, R12, S, Sx, T Quality of Service Guide.