VRRP network interface commands

config
    - router
        - [no] interface interface-name 
            - address {ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
            - no address
            - arp-timeout seconds
            - no arp-timeout
            - description description-string
            - no description
            - [no] shutdown
            -  static-arp ip-address ieee-address
            - [no] static-arp ip-address
            - vrrp virtual-router-id [owner]
            - no vrrp virtual-router-id
                - authentication-key [authentication-key | hash-key] [hash | hash2]
                - no authentication-key
                - [no] backup ip-address
                - [no] bfd-enable service-id interface interface-name dst-ip ip-address
                - [no] bfd-enable interface interface-name dst-ip ip-address
                - init-delay seconds
                - no init-delay
                - [no] master-int-inherit
                - message-interval {[seconds] [milliseconds milliseconds]}
                - no message-interval
                - [no] ping-reply
                - policy policy-id 
                - no policy
                - [no] preempt
                - priority priority
                - no priority
                - [no] ssh-reply
                - [no] standby-forwarding
                - [no] telnet-reply
                - [no] shutdown
                - [no] traceroute-reply