The following fields require specific input (there are no defaults) to configure a basic VPLS service:
Customer ID (see Configuring customer accounts).
For a local service, configure two SAPs, specifying local access ports and encapsulation values.
For a distributed service, configure a SAP and an SDP for each far-end node.
*A:ALA-1>config>service>vpls# info
----------------------------------------------
...
vpls 9001 customer 6 create
description "Local VPLS"
stp
shutdown
exit
sap 1/2/2:0 create
description "SAP for local service"
exit
sap 1/1/5:0 create
description "SAP for local service"
exit
no shutdown
----------------------------------------------
*A:ALA-1>config>service>vpls#
*A:ALA-1>config>service# info
----------------------------------------------
...
vpls 7 customer 7 create
stp
shutdown
exit
sap 1/1/21 create
exit
sap lag-1:700 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#*A:ALA-1>config>service# info
----------------------------------------------
...
vpls 9000 customer 6 create
shutdown
description "This is a distributed VPLS."
stp
shutdown
exit
sap 1/1/5:16 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
exit
...
----------------------------------------------
*A:ALA-1>config>service#
*A:ALA-2>config>service# info
----------------------------------------------
...
vpls 9000 customer 6 create
description "This is a distributed VPLS."
stp
shutdown
exit
sap 1/1/5:16 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-2>config>service#
*A:ALA-3>config>service# info
----------------------------------------------
...
vpls 9000 customer 6 create
description "This is a distributed VPLS."
stp
shutdown
exit
sap 1/1/3:33 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-3>config>service#