interface [ip-int-name | ip-addr] [icmp]
clear>router
Supported on all 7210 SAS platforms as described in this document
This command clears IP interface statistics.
If no IP interface is specified, either by IP interface name or IP address, the command performs the clear operation on all IP interfaces.
Specifies the IP interface name or IP interface address.
Keyword that specifies to reset the ICMP statistics for the IP interfaces used for ICMP rate limit.
damping [[ip-prefix/mask] [neighbor ip-address]] | [group name]
clear>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command clears or resets the route damping information for received routes.
Clears damping information for entries that match the IP prefix and mask length.
Clears damping information for entries received from the BGP neighbor.
Clears damping information for entries received from any BGP neighbors in the peer group.
flap-statistics [[ip-prefix/mask] [neighbor ip-addr]] | [group group-name] | [regex reg-exp] | [policy policy-name]
clear>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command clears route flap statistics.
Clears route flap statistics for entries that match the specified IP prefix and mask length.
Clears route flap statistics for entries received from the specified BGP neighbor.
Clears route flap statistics for entries received from any BGP neighbors in the specified peer group.
Clears route flap statistics for all entries that have the regular expression and the AS path that matches the regular expression.
Clears route flap statistics for entries that match the specified route policy.
neighbor {ip-addr | as as-number | external | all} [soft | soft-inbound | statistics]
clear>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command resets the specified BGP peer or peers. This can cause existing BGP connections to be shut down and restarted.
Resets the BGP neighbor with the specified IP address.
Resets all BGP neighbors with the specified peer AS number.
Resets all EBGP neighbors.
Resets all BGP neighbors.
Keyword to specify that the BGP neighbors reevaluate all routes in the Local-RIB against the configured export policies.
Keyword to specify that the BGP neighbors reevaluate all routes in the RIB-In against the configured import policies.
Keyword that specifies the BGP neighbor statistics.
protocol
clear>router>bgp
Supported on all 7210 SAS platforms as described in this document
This command resets the entire BGP protocol. If the AS number was previously changed, the BGP AS number does not inherit the new value.
database
clear>router>rip
Supported on all 7210 SAS platforms as described in this document
This command clears all routes in the RIP database.
id service-id
clear>service
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document
This command clears commands for a specific service.
Specifies the ID that uniquely identifies a service.
sap sap-id {all | counters | stp}
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document
This command clears SAP statistics for a SAP.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
spoke-sdp sdp-id:vc-id ingress-vc-label
clear>service>id
Supported on all 7210 SAS platforms as described in this document
This command clears and resets the spoke-SDP bindings for the service.
Specifies the spoke-SDP ID to be cleared and reset.
Specifies the virtual circuit ID on the SDP ID to be cleared and reset.
sdp sdp-id keep-alive
clear>service>statistics
Supported on all 7210 SAS platforms as described in this document
This command clears keepalive statistics associated with the SDP ID.
Specifies the SDP ID for which to clear keepalive statistics.
counters
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document
This command clears all traffic queue counters associated with the service ID.
spoke-sdp sdp-id[:vc-id] {all | counters | stp}
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document
This command clears statistics for the spoke-SDP bound to the service.
Specifies the spoke-SDP ID for which to clear statistics.
Specifies the virtual circuit ID on the SDP ID to be reset.
Clears all queue statistics and STP statistics associated with the SDP.
Clears all queue statistics associated with the SDP.
Clears all STP statistics associated with the SDP.
stp
clear>service>statistics>id
Supported on all 7210 SAS platforms as described in this document
This command clears all spanning tree statistics for the service ID.