Common configuration tasks

About this task

This section provides a brief overview of the tasks that must be performed to configure both local VPLS services and provides the CLI commands.

For VPLS services:

Procedure


  1. Associate VPLS service with a customer ID.


  2. Define SAPs:

    • Select nodes and ports.

    • Optional - select QoS policies other than the default (configured in config>qos context).

    • Optional — select filter policies (configured in config>filter context).

    • Optional — select accounting policy (configured in config>log context).


  3. Modify STP default parameters (optional) (see VPLS and Spanning Tree Protocol).


  4. Enable service.

Parent topic: Configuring a VPLS service with CLI