Configuring VLL resilience

The following figure shows an example to create VLL resilience.

Note: The zero revert-time value means that the VLL path switches back to the primary immediately after it comes back up.

Figure: VLL resilience

Example: PE1 configuration output

The following example shows configuration output on PE1.

*A:ALA-48>config>service>epipe# info
----------------------------------------------
            endpoint "x" create
            exit
            endpoint "y" create
            exit
            spoke-sdp 1:100 endpoint "y" create
                precedence primary
            exit
            spoke-sdp 2:200 endpoint "y" create
                precedence 1
            exit
            no shutdown
----------------------------------------------
*A:ALA-48>config>service>epipe#