id service-id
debug>service
Supported on all 7210 SAS platforms as described in this document
This command debugs commands for a specific service.
Specifies the ID that uniquely identifies a service.
[no] event-type {config-change | svc-oper-status-change | sap-oper-status-change | sdpbind-oper-status-change}
debug>service>id
Supported on all 7210 SAS platforms as described in this document
This command enables a particular debugging event type. The no form of this command disables the event type debugging.
Debugs configuration change events.
Debugs service operational status changes.
Debugs SAP operational status changes.
Debugs SDP operational status changes.
[no] sap sap-id
debug>service>id
Supported on all 7210 SAS platforms as described in this document
This command enables debugging for a particular SAP.
Specifies the SAP ID.
stp
debug>service>id
Supported on all 7210 SAS platforms as described in this document
This command enables the context for debugging STP.
all-events
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for all events.
[no] bpdu
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for received and transmitted BPDUs.
[no] core-connectivity
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for core connectivity.
[no] exception
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for exceptions.
[no] fsm-state-changes
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for FSM state changes.
[no] fsm-timers
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for FSM timer changes.
[no] port-role
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for changes in port roles.
[no] port-state
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for port states.
[no] sap sap-id
debug>service>id>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for a specific SAP.
Specifies the physical port identifier portion of the SAP definition. See Common CLI command descriptions for command syntax.
[no] sdp sdp-id:vc-id
debug>service>stp
Supported on all 7210 SAS platforms as described in this document
This command enables STP debugging for a specific SDP.