Epipe SAP configuration commands

config
    - service
        - [no] epipe service-id [customer customer-id] [create] [vpn vpn-id] [vc-switching] [svc-sap-type {any | qinq-inner-tag-preserve}]
        - no epipe service-id
            - sap sap-id [no-endpoint] [create]
            - sap sap-id [endpoint endpoint-name] [create]
            - no sap sap-id 
                - accounting-policy acct-policy-id
                - no accounting-policy acct-policy-id
                - [no] collect-stats
                - description description-string
                - no description
                - eth-cfm
                    - [no] ais-enable
                    - [no] mep mep-id domain md-index association ma-index [direction {up | down}] primary-vlan-enable
                        - [no] ais-enable
                            - [no] client-meg-level [[level [level ...]]
                            - [no] interval {1 | 60}
                            - [no] priority priority-value
                        - [no] ccm-enable 
                        - [no] ccm-ltm-priority priority
                        - [no] description
                        - [no] eth-test-enable
                            - [no] test-pattern {all-zeros | all-ones} [crc-enable]
                        - [no] fault-propagation-enable {use-if-tlv | suspendccm}
                        - [no] mac-address mac-address
                        - [no] one-way-delay-threshold seconds
                    - mip [mac mac address]
                    - mip default-mac
                    - no mip
                    - mep
                        - [no] ccm-enable
                        - ccm-ltm-priority priority
                        - no ccm-ltm-priority
                        - [no] eth-test-enable
                            - test-pattern {all-zeros | all-ones} [crc-enable]
                            - no test-pattern
                        - low-priority-defect {allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
                        - mac-address mac-address
                        - no mac-address
                        - [no] shutdown
                - ethernet
                    - [no] llf
                - [no] ignore-oper-down
                - [no] shutdown