ies service-id customer customer-id [create] [vpn vpn-id]
no ies service-id
config>service
Supported on all 7210 SAS platforms as described in this document
This command creates or edits an IES service instance.
If the service-id does not exist, a context for the service is created. If the service-id exists, the context for editing the service is entered.
IP interfaces defined within the context of an IES service ID must have a SAP created.
When a service is created, the customer keyword and customer-id must be specified that associates the service with a customer. The customer-id must already exist, having been created using the customer command in the service context. When a service has been created with a customer association, it is not possible to edit the customer association. The service must be deleted and recreated with a new customer association.
When a service is created, the use of the customer customer-id parameter is optional for navigating into the service configuration context. Attempting to edit a service with the incorrect customer-id specified results in an error.
More than one IP interface may be created within a single IES service ID.
By default, no IES service instances exist until they are explicitly created.
The no form of this command deletes the IES service instance with the specified service-id. The service cannot be deleted until all the IP interfaces defined within the service ID have been shutdown and deleted.
Specifies the service identification number or string for the service in the service domain. This ID must be unique to this service and may not be used for another service of any type. The service-idmust be the same number used for every router on which this service is defined.
Specifies the customer ID number to be associated with the service. This parameter is required during service creation and optional for service editing or deleting.
Specifies the VPN ID assigned to the service.
service-name service-name
no service-name
config>service>epipe
config>service>ies
config>service>vpls
config>service>vprn
Supported on all 7210 SAS platforms as described in this document
This command configures an optional service name that adds a name identifier to a specific service to then use that service name in configuration references, as well as display and use service names in show commands throughout the system. This helps the service provider or administrator to identify and manage services within the 7210 SAS platforms.
All services are required to assign a service ID to initially create a service; however, either the service ID or the service name can be used to identify and reference a specific service when it is initially created.
Specifies a unique service name, of up to 64 characters, to identify the service. Service names may not begin with an integer (0 to 9).