Interface VRRP commands (IPv4 only - applicable for network mode only)

config 
    - service
        - vprn service-id [customer customer-id]
        - no vprn service-id
            - interface ip-int-name
                - vrrp virtual-router-id [owner]
                - no vrrp virtual-router-id 
                    - authentication-key {authentication-key | hash-key} [hash | hash2]
                    - no authentication-key
                    - [no] backup ip-address
                    - [no] init-delay [service-id] interface interface-name dst-ip ip-address
                    - init-delay seconds
                    - no init-delay
                    - [no] master-int-inherit
                    - message-interval {[seconds] [milliseconds milliseconds]}
                    - no message-interval
                    - [no] ping-reply
                    - policy vrrp-policy-id
                    - no policy
                    - [no] preempt
                    - priority priority
                    - no priority
                    - [no] shutdown
                    - [no] ssh-reply
                    - [no] standby-forwarding
                    - [no] telnet-reply
                    - [no] traceroute-reply