Modifying SDPs

To access a specific SDP, you must specify the SDP ID. To display a list of SDPs, use the show service sdp command. Enter the parameter, such as description, far-end, and lsp, then enter the new information.

Note:

You cannot modify the SDP encapsulation type after the SDP is created.

config>service# sdp sdp-id

Example: Modifying SDPs

config>service# sdp 79
config>service>sdp# description ‟Path-to-107”
config>service>sdp# shutdown
config>service>sdp# far-end ‟10.10.10.107”
config>service>sdp# path-mtu 1503
config>service>sdp# no shutdown