The following information describes VLAN range SAPs feature support and restrictions:
The access SAPs that specify VLAN range values (using connection-profile) are allowed only in Epipe service. The system allows only one range SAP in an Epipe service. Any attempt to configure more than one range SAP in an Epipe service fails. Range SAP can be configured only on access ports.
In network mode, the dot1q range sap is allowed to be configured in a service with svc-sap-type set to any.
The access SAPs using VLAN range values are allowed only for dot1q encapsulation port or LAG. A connection profile is used to specify either range of VLAN IDs or individual VLANs to be grouped together in a single SAP.
A ‟connection profile” is used to specify either range of VLAN IDs or individual VLANs to be grouped together in a single SAP.
Multiple ‟connection-profile” can be used per port or Lag as long as the VLAN value specified by each of them does not overlap. The number of VLAN ranges available per port/LAG is limited. The available number must be shared among all the SAPs on the port/LAG.
‟Connection-profile”, associated with a SAP cannot be modified. To modify a connection profile, it must be removed from all SAPs that are using it.