VPRN BGP CLI syntax

Use the syntax to configure VPRN BGP parameters (BGP configuration commands).

Example: VPRN BGP configuration

*A:ALA-1>config>service# info 
----------------------------------------------
...
        vprn 1 customer 1 create
            vrf-import "vrfImpPolCust1"
            vrf-export "vrfExpPolCust1"
            autonomous-system 10000
            route-distinguisher 10001:1
            auto-bind ldp
            vrf-target target:10001:1
            interface "to-ce1" create
                address 10.1.0.1/24
                sap 1/1/10:1 create
                    ingress
                        
                        qos 100
                    exit
                        
                        filter ip 6
                    exit
                exit
            exit
            static-route 10.5.0.0/24 next-hop 10.1.1.2
            bgp
                router-id 10.0.0.1
                group "to-cel"
                    export "vprnBgpExpPolCust1"
                    peer-as 65101
                    neighbor 10.1.1.2
                    exit
                exit
            exit
            spoke-sdp 2 create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-1>config>service#