RIP Command Reference

This command creates a text description stored in the configuration file for a configuration context.

The no form of the command removes the description string from the context.

This command administratively disables an entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics.

The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they may be deleted.

The no form of this command administratively enables an entity.

Unlike other commands and parameters where the default state is not indicated in the configuration file, the shutdown and no shutdown states are always indicated in system-generated configuration files.

Default administrative states for services and service entities are described in Special Cases.

This command creates the RIP protocol instance and RIP configuration context. RIP is administratively enabled upon creation. To start or suspend execution of the RIP protocol without affecting the configuration, use the [no] shutdown command.

The no form of the command deletes the RIP protocol instance and removes all configuration parameters for the RIP instance.

This command configures the RIPv2 authentication key.

Authentication is performed between neighboring routers before setting up the RIP session by verifying the password. Authentication is performed using the MD5 message-based digest.

The authentication key can be any combination of ASCII characters up to 255 characters long. The hash-key can be any combination of ASCII characters up to 342 characters long.

The no form of the command removes the authentication password from the configuration and disables authentication.

This command sets the type of authentication to be used between RIP neighbors. Authentication type can be specified regardless of the configured send and receive parameters, but will only apply to RIPv2 packets.

The type and password must match exactly for the RIP message to be considered authentic and processed.

The no form of the command removes the authentication type from the configuration and disables authentication.

This command enables checking for zero values in fields specified to be zero by the RIPv1 and RIPv2 specifications.

The check-zero enable command enables checking of the mandatory zero fields in the RIPv1 and RIPv2 specifications and rejecting of non-compliant RIP messages.

The check-zero disable command disables this check and allows the receipt of RIP messages even if the mandatory zero fields are non-zero.

The check-zero command can be enabled at all three RIP levels. The most specific value is used. If no check-zero value is set (no check-zero), the setting from the less-specific level is inherited by the lower level.

The no form of the command disables check-zero on the configuration.

This command specifies the export route policy used to determine which routes are advertised to peers. Route policies are configured in the config>router>policy-options context. Refer to the section on “Route Policy” in the 7705 SAR OS Router Configuration Guide.

When multiple policy names are specified, the policies are evaluated in the order in which they are specified. A maximum of five (5) policy names can be configured. The first policy that matches is applied.

When multiple export commands are issued, the last command entered overrides the previous command.

By default, when no export policies are specified, RIP routes are advertised and non-RIP routes are not advertised.

The no form of the command removes the policy association with the RIP instance. To remove association of all policies, use the no export command without arguments.

This command configures the maximum number of routes (prefixes) that can be exported into RIP from the route table. Export-limit can be configured only on the global level.

The no form of the command removes the parameters from the configuration.

This command creates the context for configuring a RIP group of neighbor interfaces.

RIP groups logically associate RIP neighbor interfaces to facilitate a common configuration for RIP interfaces.

The no form of the command deletes the RIP neighbor interface group. Deleting the group also removes the RIP configuration from all of the neighbor interfaces currently assigned to the group.

This command specifies the import route policy to be used to determine which routes are accepted from peers. Route policies are configured in the config>router>policy-options context. Refer to the section on “Route Policy” in the 7705 SAR OS Router Configuration Guide.

When multiple policy names are specified, the policies are evaluated in the order in which they are specified. A maximum of five (5) policy names can be specified. The first policy that matches is applied.

When multiple import commands are issued, the last command entered will override the previous command.

When an import policy is not specified, RIP routes are accepted by default.

The no form of the command removes the policy association with the RIP instance. To remove association of all policies, use no import without arguments.

This command configures the maximum number of routes per RIP update message.

By default, each update can contain a maximum of 25 route advertisements. This limit is imposed by RIP specifications. RIP can be configured to send as many as 255 routes per update.

The no form of the command reverts to the default value.

This command configures the metric added to routes received from a RIP neighbor. The specified metric value is added to the hop count and shortens the maximum distance of the route.

When applying an export policy to a RIP configuration, the policy overrides the metric values determined through calculations involving the metric-in and metric-out values.

The no form of the command reverts to the default value.

This command configures the metric assigned to routes exported into RIP and advertised to RIP neighbors. The specified metric value is added to the hop count and shortens the maximum distance of the route.

When applying an export policy to a RIP configuration, the policy overrides the metric values determined through calculations involving the metric-in and metric-out values.

The no form of the command reverts to the default value.

This command creates the context for configuring a RIP neighbor interface.

By default, interfaces are not activated unless explicitly configured.

The no form of the command deletes the RIP interface configuration for this interface. The shutdown command in the config>router>rip>group group-name>neighbor context can be used to disable an interface without removing the configuration for the interface.

This command configures the route preference for routes learned from the configured peer(s).

The lower the preference, the higher the chance of the route being the active route. The 7705 SAR assigns the highest default preference to RIP routes as compared to routes that are direct, static, or learned via MPLS or OSPF.

This command configures the type of RIP updates that will be accepted and processed.

If you specify version-2 or both, the RIP instance listens for and accepts packets sent to the broadcast (255.255.255.255) and multicast (224.0.0.9) addresses.

If version-1 is specified, the router only listens for and accepts packets sent to the broadcast address.

The default behavior is to accept and process both RIPv1 and RIPv2 messages.

The no form of the command reverts to the default value.

This command specifies the type of RIP messages sent to RIP neighbors.

If broadcast or version-1 is specified, the router only listens for and accepts packets sent to the broadcast address.

The no form of the command reverts to the default value.

This command enables the use of split-horizon.RIP uses split-horizon with poison-reverse to avoid looping routes propagating through the network. Split-horizon with poison reverse means that routes learned from a neighbor through a given interface are advertised in updates out of the same interface but with a metric of 16 (infinity).The split-horizon disable command enables split horizon without poison reverse. With split horizon enabled, the local router does not readvertise routes learned from a neighbor back to the neighbor. This configuration parameter can be set at three levels: global level (applies to all groups and neighbor interfaces), group level (applies to all neighbor interfaces in the group) or neighbor level (only applies to the specified neighbor interface). The most specific value is used. In particular if no value is set (no split-horizon), the setting from the less specific level is inherited by the lower level.The no form of the command disables split horizon.

This command configures values for the update, timeout, and flush RIP timers.The RIP update timer determines how often RIP updates are sent.If the route is not updated by the time the RIP timeout timer expires, the route is declared invalid but is maintained in the RIP database.The RIP flush timer determines how long a route is maintained in the RIP database after it has been declared invalid. Once the flush timer expires, the route is removed from the RIP database.The no form of the command reverts to the default values.