This chapter lists the 7705 SAR compliance with EMC, environmental, and safety standards, telecom standards, and supported protocols:
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
IEEE 1613:2009 + A1:2011 | IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations | ✓ 1 | ✓ 3 | ✓ 2 | ✓ 1 | ✓ 3 | ✓ 3 | ||||
IEEE 1613.1-2013 | IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities | ✓ 4 | ✓ 7 | ✓ 5 | ✓ 6 | ✓ 7 | ✓ 7 | ||||
IEEE Std C37.90 | IEEE Standard for relays and relay systems associated with Electric Power Apparatus | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEEE Std C37.90.1 | Surge Withstand Capability (SWC) Tests | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEEE Std C37.90.2 | Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEEE Std C37.90.3 | IEEE Standard Electrostatic Discharge Tests for Protective Relays | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
EN 50121-4 | Electromagnetic Compatibility – Part 4: Emission and Immunity of the Signalling and Telecommunications Apparatus | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 62236-4 | Electromagnetic Compatibility – Part 4: Emission and Immunity of the Signalling and Telecommunications Apparatus | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-6-2 | Generic standards – Immunity for industrial environments | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-6-4 | Generic standards – Emissions standard for industrial environments | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-6-5 | Generic standards – immunity for equipment used in power station and substation environment | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61850-3 | Communication networks and systems for power utility automation - Part 3: General requirements | ✓ | ✓ | ✓ | ✓ 8 | ✓ | ✓ | ||||
IEC/AS 60870.2.1 | Telecontrol equipment and systems. Operating conditions. Power supply and electromagnetic compatibility | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Notes:
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
IEC 61000-4-2 | Electrostatic discharge immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-4-3 | Radiated electromagnetic field immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-4-4 | Electrical fast transient/burst immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-4-5 | Surge immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-4-6 | Immunity to conducted disturbances | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 61000-4-8 | Power frequency magnetic field immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-9 | Pulse Magnetic field immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-10 | Damped Oscillatory Magnetic Field | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-11 | Voltage dips, short interruptions and voltage variations immunity tests | ✓ | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ | ✓ 1 | ✓ | ✓ |
IEC 61000-4-12 | Oscillatory wave immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-16 | Conducted immunity 0 Hz - 150 kHz | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-17 | Ripple on d.c. input power port immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-18 | Damped oscillatory wave immunity test | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-4-29 | Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC 61000-3-2 | Limits for harmonic current emissions (equipment input current <16A per phase) | ✓ | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ | ✓ 1 | ✓ | ✓ |
IEC 61000-3-3 | Limits for voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <16A | ✓ | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ | ✓ 1 | ✓ | ✓ |
ITU-T K.20 (DC Ports) | Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
ITU-T K.44 | Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents - Basic Recommendation | ✓ | ✓ | ||||||||
ETSI 300 132-2 | Power supply interface at the input to telecommunications and datacom (ICT) equipment; Part 2: Operated by -48 V direct current (dc) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
ETSI 300 132-3 | Power supply interface at the input to telecommunications equipment; Part 3: Operated by rectified current source, alternating current source or direct current source up to 400V | ✓ | ✓ 1 | ✓ 1 | ✓ 1 | ✓ | ✓ 1 | ✓ | ✓ | ||
EN 300 386 | Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
ES 201 468 | Electromagnetic compatibility and Radio spectrum Matters (ERM); Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
EN 55024 | Information technology equipment -Immunity characteristics - Limits and methods of measurements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Telcordia GR-1089-CORE | EMC and Electrical Safety - Generic Criteria for Network Telecommunications Equipment | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
AS/NZS CISPR 32 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 3 | ✓ 3 |
FCC Part 15, Subpart B | Radio Frequency devices- Unintentional Radiators (Radiated & Conducted Emissions) | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 3 | ✓ 3 |
ICES-003 | Information Technology Equipment (ITE) — Limits and methods of measurement | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 3 | ✓ 3 |
EN 55032 | Electromagnetic compatibility of multimedia equipment – Emission requirements | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 |
CISPR 32 | Electromagnetic compatibility of multimedia equipment – Emission requirements | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 |
GS7 EMC | Electromagnetic Standard Compatibility (BT standard) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||
KC Notice Emission (KN32) and Immunity (KN35) (South Korea) | EMS standard: NRRA notice | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Notes:
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
IEEE 1613:2009 + A1:2011 | Environmental and Testing Requirements for Communications Networking Devices | ✓ 1 | ✓ | ✓ 1 | ✓ 1 | ✓ | ✓ | ||||
IEC 61850-3 | Communication networks and systems for power utility automation - Part 3: General requirements | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ✓ 2 | ||||
IEC 60068-2-1 | Environmental testing – Part 2-1: Tests – Test A: Cold | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 60068-2-2 | Environmental testing - Part 2-2: Tests - Test B: Dry heat | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 60068-2-30 | Environmental testing - Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC 60255-21-2 | Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
ETSI 300 753 Class 3.2 | Acoustic noise emitted by telecommunications equipment | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Telcordia GR-63-CORE | NEBS Requirements: Physical Protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
ETSI EN 300 019-2-1 Class 1.2 | Specification of environmental tests; Storage | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
ETSI EN 300 019-2-2 Class 2.3 | Specification of environmental tests; Transportation | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
ETSI EN 300 019-2-3 Class 3.2 | Specification of environmental tests; Stationary use at weatherprotected locations | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
ETSI EN 300 019-2-4 Class T4.1 | Specification of environmental tests; Stationary use at non-weatherprotected locations | ✓ | ✓ | ||||||||
Telcordia GR-3108-CORE | Generic Requirements for Network Equipment in the Outside Plant (OSP) | ✓ 3 | ✓ 3 | ✓ 3 | ✓ 3 | ✓ 3 | ✓ 3 | ✓ 3 | ✓ 4 | ✓ 4 | |
Telcordia GR-950-CORE | Generic Requirements for ONU Closures and ONU Systems | ✓ | ✓ | ||||||||
“GR-3108 Class 3 Section 6.2 IEC 60068-2-52 - Severity 3 MIL-STD-810G Method 509.5 EN 60721-3-3 Class 3C4 EN 60068-2-11: Salt Mist EN 50155 Class ST4” | Conformal Coating 5 | ✓ | ✓ | ✓ | ✓ | ✓ |
Notes:
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
UL/CSA 60950-1 | Information technology equipment - Safety - Part 1: General requirements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
IEC/EN 60950-1 | Information technology equipment - Safety - Part 1: General requirements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
UL/CSA 62368-1 | Audio/video, information and communication technology equipment - Part 1: Safety requirements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
IEC/EN 62368-1 | Audio/video, information and communication technology equipment - Part 1: Safety requirements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||
AS/NZS 60950-1 | Information technology equipment - Safety - Part 1: General requirements | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
AS/NZS 62368-1 | Audio/video, information and communication technology equipment, Part 1: Safety requirements | ✓ | ✓ | ✓ | ✓ | ✓ | |||||
IEC/EN 60825-1 and 2 | Safety of laser products - Part 1: Equipment classification and requirements Part 2: Safety of optical fibre communication systems (OFCS) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
UL/CSA 60950-22 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors | ✓ | ✓ | ||||||||
CSA–C22.2 No.94 | Special Purpose Enclosures | ✓ | ✓ | ||||||||
UL50 | Enclosures for Electrical Equipment, Non-Environmental Consideration | ✓ | ✓ | ||||||||
IEC/EN 60950-22 | Information technology equipment. Equipment to be installed Outdoors. | ✓ | ✓ | ||||||||
IEC 60529 | Degrees of Protection Provided by Enclosures (IP Code) | ✓ 1 | ✓ 2 | ✓ 2 | ✓ 1 | ✓ 1 | ✓ 1 | ✓ 2 | ✓ 2 | ✓ 3 | ✓ 3 |
Notes:
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
IC CS-03 Issue 9 | Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
ACTA TIA-968-B | Telecommunications - Telephone Terminal Equipment - Technical Requirements for Connection of Terminal Equipment to the Telephone Network | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
AS/ACIF S016 (Australia) | Requirements for Customer Equipment for connection to hierarchical digital interfaces | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
ATIS-06000403 | Network and Customer Installation Interfaces- DS1 Electrical Interfaces | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
ANSI/TIA/EIA-422-B (RS422) | Electrical Characteristics for balanced voltage digital interfaces circuits | ✓ | ✓ | ||||||||
ITU-T G.825 | The control of jitter and wander within digital networks which are based on the synchronous digital hierarchy (SDH) | ✓ | ✓ | ||||||||
ITU-T G.703 | Physical/electrical characteristics of hierarchical digital interfaces | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
ITU-T G.712 (E&M) | Transmission performance characteristics of pulse code modulation channels | ✓ | ✓ | ||||||||
ITU-T G.957 | Optical interfaces for equipments and systems relating to the synchronous digital hierarchy | ✓ | ✓ | ||||||||
ITU-T V.24 (RS232) | List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) | ✓ | ✓ | ✓ | ✓ | ||||||
ITU-T V.28 (V35) | Electrical characteristics for unbalanced double-current interchange circuits | ✓ | ✓ | ||||||||
ITU-T V.36 (V35) | Modems for synchronous data transmission using 60-108 kHz group band circuits | ✓ | ✓ | ||||||||
ITU-T V.11 / X.27 (RS-422) | Electrical characteristics for balanced double current interchange circuits operating at data signalling rates up to 10 Mbit/s | ✓ | ✓ | ||||||||
ITU-T X.21 (RS-422) | Interface between Data Terminal Equipment and Data Circuit-terminating Equipment for synchronous operation on public data networks | ✓ | ✓ | ||||||||
IEEE 802.3at (POE) | Data Terminal Equipment Power via the Media Dependent Interfaces Enhancements | ✓ | ✓ | ✓ | ✓ | ✓ |
Standard | Title | Platform | |||||||||
SAR-X | SAR-A | SAR-Ax | SAR-M | SAR-8 | SAR-18 | SAR-H | SAR-Hc | SAR-W | SAR-Wx | ||
EU Directive 2014/30/EU (EMC) | Electromagnetic Compatibility (EMC) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
EU Directive 2014/35/EU (LVD) | Low Voltage Directive (LVD) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
EU Directive 2012/19/EU (WEEE) | Waste Electrical and Electronic Equipment (WEEE) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
EU Directive 2011/65/EU (RoHS) | EU Directive 2011/65/EU Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (Recast) Directive(including Commission Delegated Directive (EU) 2015/863) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
CE Mark | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
UKCA Mark | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
CRoHS Logo; Ministry of Information Industry order No.39 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
China (MII NAL) Network Access License | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||||
South Korea (KC Mark) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |||
Australia (RCM Mark) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
Japan (VCCI Mark) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||
NEBS Level 3 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
TL9000 certified | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
ISO 14001 certified | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | |
ISO 9001 certified | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |