Broadcast-client

The broadcast-client command enables listening at the global device level to SNTP broadcast messages on interfaces with broadcast client enabled.

CLI Syntax:

config>system>time>sntp
    broadcast-client

Example:

config>system>time>sntp# broadcast-client
config>system>time>sntp# no shutdown

The following example shows SNTP enabled with the broadcast-client parameter enabled.

ALU-1>config>system>time# info
----------------------------------------------
            sntp
                broadcast-client
                no shutdown
            exit
            dst-zone PT
                start second sunday april 02:00
                end first sunday october 02:00
                offset 0
            exit
            zone GMT
----------------------------------------------
ALU-1>config>system>time#