Broadcastclient

The broadcastclient command enables listening to NTP broadcast messages on the specified interface.

CLI Syntax:

config>system>time>ntp
    broadcastclient[router router-name] {interface ip-int-name} [authenticate]

Example:

config>system>time>ntp# broadcastclient interface int11
config>system>time>ntp# no shutdown

The following example shows NTP enabled with the broadcastclient parameter enabled.

ALU-1>config>system>time# info
----------------------------------------------
            ntp
                broadcastclient interface int11
                no shutdown
            exit
            dst-zone PT
                start second sunday april 02:00
                end first sunday october 02:00
                offset 0
            exit
            zone UTC
----------------------------------------------
ALU-1>config>system>time#