screen
clear
This command allows an operator to clear the Telnet or console screen.
ptp
clear>system
This command enables the context to clear Precision Timing Protocol (PTP) information.
clock clock-id statistics
clock csm port port-id statistics
clear>system>ptp
This command clears PTP clock information.
specifies the clock ID of this PTP instance
specifies a PTP Ethernet port in the format slot/mda/port
clears statistics on the PTP clock or Ethernet port
script-control
clear>system
This command enables the context to clear script information.
script-policy
clear>system>script-control
This command enables the context to clear script policy information.
completed [policy-name] [owner policy-owner]
clear>system>script-control>script-policy
This command clears completed script run history entries.
specifies to only clear history entries for the specified script policy
specifies to only clear history entries for script policies with the specified owner
sync-if-timing {external | ref1 | ref2}
clear>system
This command allows an operator to individually clear (re-enable) a previously failed reference. As long as the reference is one of the valid options, this command is always executed. An inherent behavior enables the revertive mode which causes a re-evaluation of all available references.
clears the third timing reference
clears the first timing reference
clears the second timing reference
trace log
clear
This command allows an operator to clear the trace log.