Configuring ATM Parameters

The ATM context configures system-wide ATM parameters.

CLI Syntax:

config>system
    atm
        atm-location-id location-id

Example:

config>system# atm
config>system>atm# atm-location-id 03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00

The following example shows the ATM configuration.

ALU-1>config>system>atm# info
----------------------------------------------
            atm-location-id 03:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
exit
----------------------------------------------
ALU-1>config>system>atm#