Name

Use the system name command to configure a name for the device. The name is used in the prompt string. Only one system name can be configured. If multiple system names are configured, the last one encountered overwrites the previous entry.

Use the following CLI syntax to configure the system name:

CLI Syntax:

config>system
    name system-name

Example:

config>system# name ALU-1

The following example displays the system name:

ALU-1>config>system# info
#------------------------------------------
echo "System Configuration"
#------------------------------------------
        name "ALU-1"
. . .
        exit
----------------------------------------------
ALU-1>config>system#