Save

The save command saves the running configuration to a configuration file. When the debug-save parameter is specified, debug configurations are saved in the config file. If this parameter is not specified, debug configurations are not saved between reboots.

CLI Syntax:

admin
    save [file-url] [detail] [index] 
    debug-save [file-url]

Example:

admin# save ftp://test:test@192.168.x.xx/./1.cfg
admin# debug-save debugsave.txt

The following example displays the save command results.

ALU-1>admin# save ftp://test:test@192.168.x.xx/./1x.cfg
Writing file to ftp://test:test@192.168.x.xx/./1x.cfg
Saving configuration ...Completed.
ALU-1>admin# debug-save ftp://test:test@192.168.x.xx/./debugsave.txt
Writing file to ftp://julie:julie@192.168.x.xx/./debugsave.txt
Saving debug configuration .....Completed.