Server-address

The server-address command configures an SNTP server for SNTP unicast client mode.

CLI Syntax:

config>system>time>sntp
    server-address ip-address version version-number] [normal | preferred] [interval seconds]

Example:

config>system>time>sntp# server-address 10.10.0.94 version 1preferred interval 100

The following example shows SNTP enabled with the server-address parameter configured.

ALU-1>config>system>time# info
----------------------------------------------
            sntp
                server-address 10.10.0.94 version 1 preferred interval 100
                no shutdown
            exit
            dst-zone PT start-date 2018/04/04 12:00 end-date 2018/10/25 12:00
            zone GMT
----------------------------------------------
ALU-1>config>system>time#