System PTP Commands

config
    - system 
        - ptp
            - clock clock-id [create]
            - no clock
                - alternate-profile profile-name [create]
                - no alternate-profile profile-name
                    - description description-string
                    - no description
                    - domain domain-value
                    - no domain
                    - initial-time-inaccuracy initial-time-inaccuracy
                    - no initial-time-inaccuracy
                    - log-anno-interval log-anno-interval
                    - no log-anno-interval
                    - profile {c37dot238-2017 | iec-61850-9-3-2016}
                    - no profile
                - anno-rx-timeout number-of-timeouts
                - no anno-rx-timeout
                - clock-mda mda-id
                - no clock-mda 
                - clock-type {ordinary {master | slave} | boundary | transparent-e2e}
                - no clock-type
                - domain domain-value
                - no domain
                - [no] dynamic-peers
                - freq-source {ptp | ssu}
                - no freq-source 
                - local-priority priority
                - no local-priority 
                - log-anno-interval log-anno-interval
                - no log-anno-interval
                - network-type {sdh | sonet}
                - no network-type 
                - port port-id [create]
                - no port port-id 
                    - address {01:1b:19:00:00:00 | 01:80:c2:00:00:00e}
                    - no address 
                    - local-priority priority
                    - no local-priority 
                    - log-delay-interval log-delay-interval
                    - no log-delay-interval 
                    - log-sync-interval log-sync-interval
                    - no log-sync-interval
                    - master-only {true | false}
                    - profile {primary | name}
                    - no profile
                    - [no] shutdown 
                    - time-inaccuracy-override time-inaccuracy-override
                    - no time-inaccuracy-override
                - priority1 priority-value
                - no priority1
                - priority2 priority-value
                - no priority2
                - profile {c37dot238-2017| iec-61850-9-3-2016 | ieee1588-2008 | itu-telecom-freq | g8275dot1-2014 | g8275dot2-2016}
                - no profile
                - ptp-port port-id
                    - anno-rx-timeout number-of-timeouts
                    - no anno-rx-timeout
                    - local-priority priority
                    - no local-priority 
                    - log-anno-interval log-anno-interval
                    - no log-anno-interval
                    - log-sync-interval log-sync-interval
                    - no log-sync-interval
                    - master-only {true | false}
                    - peer peer-id
                        - description description-string 
                        - no description
                        - ip-address {ip-address | ipv6-address}
                        - no ip-address
                    - [no] shutdown 
                    - [no] unicast-negotiate
                -  [no] shutdown 
                - source-interface ip-int-name
                - no source-interface
                - [no] tx-while-sync-uncertain
                - [no] use-node-time