config
- system
- sync-if-timing
- abort
- begin
- bits
- input
- [no] shutdown
- interface-type {ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}] | 2048khz-G703}
- no interface-type
- output
- line-length {110 | 220 | 330 | 440 | 550 | 660}
- [no] shutdown
- source {line-ref | internal-clock}
- ql-override {prs | stu | st2 | tnc | st3e | st3 | smc | prc | ssu-a| ssu-b | sec | eec1 | eec2}
- no ql-override
- ssm-bit sa-bit
- commit
- external
- input-interface
- impedance {high-impedance | 50-Ohm | 75-Ohm}
- [no] shutdown
- type {2048khz-G703 | 5mhz | 10mhz}
- no type
- output-interface
- type {2048khz-G703 | 5mhz | 10mhz}
- no type
- ql-override {prs | stu | st2 | tnc | st3e | st3 | smc | prc | ssu-a | ssu-b | sec | eec1 | eec2}
- no ql-override
- [no] ql-selection
- ref-order first second [third]
- no ref-order
- ref1
- ql-override {prs | stu | st2 | tnc | st3e | st3 | smc | prc | ssu-a | ssu-b | sec | eec1 | eec2}
- no ql-override
- [no] shutdown
- source-port port-id [adaptive]
- no source-port
- source-ptp-clock clock-id
- no source-ptp-clock
- ref2
- ql-override {prs | stu | st2 | tnc | st3e | st3 | smc | prc | ssu-a | ssu-b | sec | eec1 | eec2}
- no ql-override
- [no] shutdown
- source-port port-id [adaptive]
- no source-port
- source-ptp-clock clock-id
- no source-ptp-clock
- [no] revert