The 7705 SAR supports the configuration of one aggregate CIR rate for all the unshaped network egress Ethernet VLANs on a port, thereby ensuring that all the unshaped VLANs can compete with the shaped VLANs (that is, network interfaces) at the port level for egress bandwidth. Use the config>port>ethernet> network>egress>unshaped-if-cir command to set the aggregate CIR rate.
The unshaped-if-cir command does not apply to Gen-3 Ethernet adapter cards and platforms, except for network egress in hybrid mode. In this case, the shaper-if-cir command applies.
For more information on shaped and unshaped Ethernet VLANs, refer to the ‟Per-VLAN Network Egress Shapers” and ‟QoS for Gen-3 Adapter Cards and Platforms” sections in the 7705 SAR Quality of Service Guide.