ATM Interface Commands

Use the following CLI syntax to configure basic ATM interface parameters for SONET/SDH ports.

CLI Syntax:
port port-id
    sonet-sdh
        path [sonet-sdh-index]
            atm
                cell-format cell-format
                min-vp-vpi value

Use the following CLI syntax to configure basic ATM interface parameters for TDM DS3/E3 ports.

CLI Syntax:
port port-id
    tdm
        ds3
            atm
                cell-format cell-format
                mapping direct
                min-vp-vpi value
        e3
            atm
                cell-format cell-format
                min-vp-vpi value

Use the following CLI syntax to configure basic ATM interface parameters for TDM DS1/E1 channels.

CLI Syntax:
port port-id
    tdm
        ds1 
            channel-group 1
                atm
                    cell-format cell-format
                    min-vp-vpi value
        e1
            channel-group 1
                atm
                    cell-format cell-format
                    min-vp-vpi value

Use the following CLI syntax to configure basic ATM interface parameters for IMA multilink bundles.

CLI Syntax:
port>multilink-bundle
    ima
        atm
            cell-format cell-format
            min-vp-vpi value