external-alarms alarm [all | alarm-id]
clear
This command clears remote site external alarm information.
clears the status for all alarms
clears the status for a specific alarm
lag lag-id statistics
clear
This command clears statistics for the specified LAG.
the LAG identifier, expressed as a decimal integer
specifies that statistics are cleared for the specified LAG
mda mda-id
mda mda-id statistics {source-mda | destination-mda | fabric-port | fabric-global | fabric-firewall | all}
mda mda-id ring {all | mac ieee-address | port port-id}
mda mda-id statistics ip-transport
mda mda-id statistics security [encryption | firewall]
mda mda-id statistics mirror
mda mda-id statistics cflowd
mda all
clear
The clear mda form of this command reinitializes the specified adapter card and clears all the collected fabric statistics related to the card. The clear mda statistics form of this command clears all the collected fabric statistics related to the specified adapter card. The clear mda ring form of this command clears the dynamic FDB entries related to the specified ring adapter card.
The clear mda all form of this command applies only to the 7705 SAR-A, 7705 SAR-Ax, 7705 SAR-M, 7705 SAR-H, 7705 SAR-Hc, and 7705 SAR-Wx and is equivalent to clearing all adapter cards using all keywords above (source-mda, destination-mda, fabric-port, and fabric-global)
the slot number of the specified adapter card
specifies that fabric statistics will be cleared for the specified adapter card
clears all the network and access ingress traffic statistics in the fabric direction from the specified adapter card towards all other destination adapter cards
clears all the network and access ingress traffic statistics towards the specified adapter card fabric port, from all other adapter cards
clears the fabric port statistics towards the specified destination adapter card, if the specified adapter card has fabric-stats-enabled. If the specified adapter card does not have fabric-stats-enabled, no statistics will be cleared.
clears global fabric statistics collected for all egress traffic from the fabric
clears fabric firewall statistics collected for all egress traffic from the fabric
clears only security statistics for the specified adapter card
specifies that encryption statistics will be cleared for the specified adapter card
specifies that firewall statistics will be cleared for the specified adapter card
specifies that IP transport statistics will be cleared for the specified adapter card
specifies that mirror statistics will be cleared for the specified adapter card
clears Cflowd queue statistics on the 7705 SAR-8 Shelf V2, 7705 SAR-18, or 7705 SAR-X
clears all the collected fabric statistics related to the specified adapter card. This command is equivalent to clearing the specified adapter card using all keywords above (source-mda, destination-mda, fabric-port, fabric-global).
clears the entire dynamic FDB
clears the dynamic FDB entry for the specified MAC address
clears the dynamic FDB entries for the specified port
clears all the collected fabric statistics across all adapter cards or modules
mw
clear
This command enables the context to clear microwave link parameters.
link mw-link-id statistics
clear mw
This command clears microwave link statistics.
specifies the microwave link ID number, using the form mw-link-id
radio port-id
radio radio perfmon [all | g826 | acm | power]
clear mw
This command reboots managed microwave devices or resets their performance monitoring statistics.
This command will bring down the microwave link; traffic will not pass over it while the radio is rebooting.
specifies the physical port ID associated with the MPR-e radio, in the format slot/mda/port (where port = 1 through 4)
specifies the MWA performance monitoring radio
resets the Adaptive Coding and Modulation level MWA performance monitoring statistics to 0
resets all MWA performance monitoring statistics to 0
resets the G.286 MWA performance monitoring statistics to 0
resets the radio power MWA performance monitoring statistics to 0
rsl-history port-id
clear mw
This command clears the RSL history for the specified MPR-e radio.
specifies the physical port ID associated with the MPR-e radio, in the format slot/mda/port (where port = 1 through 4)
port port-id statistics
port port-id atm pvc [vpi[/vci]] statistics
port port-id atm pvp [vpi] statistics
port port-id frame-relay dlci dlci
clear
This command clears the statistics for the specified port or channel group.
specifies the physical port ID
Syntax |
port-id |
slot[/mda[/port]] or slot/mda/port[.channel] |
bundle-id |
bundle-type-slot/mda.bundle-num |
|
bundle keyword |
||
bundle-num: 1 to 32 |
||
type ima, ppp |
specifies that port statistics will be cleared
specifies that ATM port statistics will be cleared
specifies the ATM network virtual path identifier (VPI) for this PVC
specifies the ATM network virtual channel identifier (VCI) for this PVC
clears PVC statistics
clears PVP statistics
clears circuit-level frame relay statistics
specifies the frame relay virtual circuit identifier
The clear port port-id statistics frame-relay dlci dlci command differs from the clear port port-id statistics command in the sense that the former clears the circuit-level SAP statistics whereas the latter clears the frame relay port statistics.
scada bridge-id statistics
clear
This command clears the statistics for all or specified bridges or branches.
specifies the bridge ID or branch ID (the bridge ID is in the format slot/mda/bridge-id, where bridge-id is 1 to 16; the branch ID is in the format slot/mda/bridge-id.branch-id, where branch-id is 1 to 32)
specifies that bridge or branch statistics will be cleared