Configuring Adapter Card Fabric Profile

Ingress fabric profiles can be configured on an adapter card, in either a network or access context, to allow network ingress to fabric shapers to be user-configurable at rates that provide up to 1 Gb/s switching throughput from the adapter card toward the fabric. For more information about fabric profiles, see the 7705 SAR Quality of Service Guide, ‟QoS Fabric Profiles”.

Fabric profiles do not apply to the Auxiliary Alarm card.

Use the following CLI syntax to assign a fabric profile on an adapter card.

CLI Syntax:

config>card>mda#
    mda-type type
    [no] fabric-stats-enabled
    network
        ingress
            fabric-policy fabric-policy-id
            queue-policy name
    access
        ingress
            fabric-policy fabric-policy-id
    no shutdown