Configuring Ring Adapter Card or Module Network and Network Queue QoS Policies

Network and network queue QoS policies can optionally be applied to a ring adapter card or module, such as the 2-port 10GigE (Ethernet) Adapter card or 2-port 10GigE (Ethernet) module.

Network policies define ring type network policies to a ring adapter card, where a ring type is a network-policy-type. Network queue policies define the add/drop port network queuing at the adapter card node level.

Network and network queue policy parameters are configured in the config>qos context. For more information about network queue policies, see the 7705 SAR Quality of Service Guide, ‟Network QoS Policies” and ‟Network Queue QoS Policies”.

Use the following CLI syntax to configure network and network queue policies on an adapter card.

CLI Syntax:

config>card>mda# 
    network
        ring
            add-drop-port-queue-policy name
            qos-policy network-policy-id
    no shutdown