LAG Commands

config
    - [no] lag [lag-id]
        - access
            - adapt-qos {link | distribute}
        - bfd
            - family ipv4
                - [no] bfd-on-distributing-only
                - local-ip-address ip-address
                - no local-ip-address
                - max-admin-down-time [[down-interval] | infinite]
                - no max-admin-down-time
                - max-setup-time [[up-interval] | infinite]
                - no max-setup-time
                - multiplier multiplier
                - no multiplier
                - receive-interval receive-interval
                - no receive-interval
                - remote-ip-address ip-address
                - no remote-ip-address
                - [no] shutdown
                - transmit-interval transmit-interval
                - no transmit-interval
        - description description-string
        - no description
        - [no] dynamic-cost
        - encap-type {dot1q | null | qinq}
        - no encap-type
        - hold-time down hold-down-time
        - no hold-time
        - lacp [mode] [administrative-key admin-key] [system-id system-id] [system-priority priority]
        - no lacp
        - lacp-xmit-interval {slow | fast}
        - no lacp-xmit-interval
        - [no] lacp-xmit-stdby
        - mac ieee-address
        - no mac
        - mode {access | network | hybrid}
        - no mode
        - port port-id [port-id] [priority priority] [sub-group sub-group-id]
        - no port port-id
        - port-threshold value [action {dynamic-cost | down}]
        - no port-threshold
        - selection-criteria [best-port | highest-count | highest-weight] [slave-to-partner] [subgroup-hold-time hold-time]
        - no selection-criteria
        - [no] shutdown
        - standby-signaling [lacp | power-off]
        - no standby-signaling