Unless otherwise specified, references to adapter cards with multiple versions include all versions of the cards.
A maximum of six adapter cards can be installed in the 7705 SAR-8 Shelf V2 chassis. The following adapter cards are supported:
2-port 10GigE (Ethernet) Adapter card (maximum of 4)
2-port OC3/STM1 Channelized Adapter card (maximum of 6, depending on channelization – see note below)
4-port OC3/STM1 / 1-port OC12/STM4 Adapter card (maximum of 6)
4-port OC3/STM1 Clear Channel Adapter card (maximum of 6)
4-port DS3/E3 Adapter card (maximum of 6, depending on channelization – see note below)
6-port E&M Adapter card (maximum of 6)
6-port FXS Adapter card (maximum of 6)
6-port Ethernet 10Gbps Adapter card (maximum of 6)
8-port FXO Adapter card (maximum of 6)
8-port Gigabit Ethernet Adapter card (maximum of 6)
8-port Voice & Teleprotection card (maximum of 6)
8-port C37.94 Teleprotection card (maximum of 5)
12-port Serial Data Interface card (maximum of 6)
16-port T1/E1 ASAP Adapter card (maximum of 6)
32-port T1/E1 ASAP Adapter card (maximum of 6)
Auxiliary Alarm card (maximum of 6)
CWDM OADM Adapter card (maximum of 6)
GNSS Receiver card (maximum of 2)
Integrated Services card (maximum of 6)
Packet Microwave Adapter card (maximum of 6)
Power Injector card (maximum of 4)
A maximum of 12 MDA adapter cards and 4 XMDA adapter cards can be installed in the 7705 SAR-18 chassis. The following adapter cards are supported:
2-port 10GigE (Ethernet) Adapter card (maximum of 6)
2-port OC3/STM1 Channelized Adapter card (maximum of 12, depending on channelization – see note below)
4-port OC3/STM1 / 1-port OC12/STM4 Adapter card (maximum of 12)
4-port OC3/STM1 Clear Channel Adapter card (maximum of 12)
4-port DS3/E3 Adapter card (maximum of 12, depending on channelization – see note below)
6-port E&M Adapter card (maximum of 12)
6-port FXS Adapter card (maximum of 12)
6-port Ethernet 10Gbps Adapter card (maximum of 12)
8-port FXO Adapter card (maximum of 12)
8-port Gigabit Ethernet Adapter card (maximum of 12)
8-port Voice & Teleprotection card (maximum of 12)
8-port C37.94 Teleprotection card (maximum of 11)
10-port 1GigE/1-port 10GigE X-Adapter card (maximum of 4)
12-port Serial Data Interface card (maximum of 12)
16-port T1/E1 ASAP Adapter card (maximum of 12)
32-port T1/E1 ASAP Adapter card (maximum of 12)
Auxiliary Alarm card (maximum of 12)
CWDM OADM Adapter card (maximum of 12)
GNSS Receiver card (maximum of 2)
Integrated Services card (maximum of 12)
Packet Microwave Adapter card (maximum of 12)
Power Injector card (maximum of 8)
On a 7705 SAR-8 Shelf V2 chassis:
a maximum of six 2-port OC3/STM1 Channelized Adapter cards can be installed in MDA slots 1 to 6 if DS3 channelization is being used. If DS1/E1 or DS0 (64 kb/s) channelization is being used, a maximum of four 2-port OC3/STM1 Channelized Adapter cards can be installed in MDA slots 1 to 6.
a maximum of six 4-port DS3/E3 Adapter cards can be installed in MDA slots 1 to 6 if DS3/E3 or DS1/E1 channelization is being used. If DS0 (64 kb/s) channelization is being used, a maximum of four 4-port DS3/E3 Adapter cards can be installed in MDA slots 1 to 6.
a maximum of six 4-port OC3/STM1 / 1-port OC12/STM4 Adapter cards can be installed in MDA slots 1 to 6 if DS1/E1 channelization is being used. DS0 and DS3/E3 channelization is not supported on the 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card.
a maximum of six 6-port Ethernet 10Gbps Adapter cards can be installed in MDA slots 1 to 6. When installed in MDA slot 1 or 2, the 6-port Ethernet 10Gbps Adapter card supports a 10-Gb/s fabric rate. When installed in MDA slots 3 through 6, the aggregate fabric rate is 2.5 Gb/s.
On a 7705 SAR-18 chassis:
a maximum of twelve 2-port OC3/STM1 Channelized Adapter cards can be installed in MDA slots 1 to 12 if DS3 channelization is being used. If DS1/E1 or DS0 (64 kb/s) channelization is being used, a maximum of four 2-port OC3/STM1 Channelized Adapter cards can be installed in MDA slots 1 to 12.
a maximum of twelve 4-port DS3/E3 Adapter cards can be installed in MDA slots 1 to 12 if DS3/E3 or DS1/E1 channelization is being used. If DS0 (64 kb/s) channelization is being used, a maximum of four 4-port DS3/E3 Adapter cards can be installed in MDA slots 1 to 12.
a maximum of twelve 4-port OC3/STM1 / 1-port OC12/STM4 Adapter cards can be installed in MDA slots 1 to 12 if DS1/E1 channelization is being used. DS0 and DS3/E3 channelization is not supported on the 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card.
The total number of channel groups that can be configured per card and per node is bound by release-specific system limits. For more information, please contact your Nokia technical support representative.