fabric-profile mda {mda-id | with-stats-enabled} {dest-mda | source-mda} [interval seconds] [repeat repeat] [absolute | rate]
monitor
This command enables monitoring of adapter card fabric profile statistics. The specified adapter card statistical information displays and automatically refreshes at the configured interval.
the slot number of the adapter card
if used, this keyword replaces the mda-id parameter, in which case the adapter card that has fabric-stats-enabled configured will be the one that is monitored, that is, the command will be monitor fabric-profile mda with-stats-enabled dest-mda | source-mda. If there are no adapter cards that have fabric-stats-enabled configured, no statistics will be displayed.
displays network and access ingress statistics for all adapter cards going toward the fabric and destined for the specific destination adapter card. The following are also displayed: global fabric statistics, fabric firewall statistics, and the fabric port statistics if the destination adapter card has the collection of fabric statistics enabled. The sum of traffic forwarded or dropped is also displayed.
displays network and access ingress traffic statistics from the specified adapter card going toward the fabric and toward a destination adapter card. Fabric firewall statistics and the sum of traffic forwarded or dropped are also displayed.
specifies the interval for each display in seconds
specifies how many times the command is repeated
the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
the rate per second for each statistic is displayed instead of the delta
lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
monitor
This command enables monitoring of traffic statistics for Link Aggregation Group (LAG) ports. Statistical information for the specified LAG is shown at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified LAG. The subsequent statistical information listed for each interval is displayed as a delta to the previous screen. When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information is shown. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
the LAG ID
specifies the interval for each display in seconds
specifies how many times the command is repeated
the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
the rate per second for each statistic is displayed instead of the delta
The following output is an example of LAG monitoring statistics.
Output ExampleA:Dut-B# monitor lag 1 interval 3 repeat 1
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id Input packets Output packets
Input bytes Output bytes
Input errors [Input util %] Output errors [Output util %]
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1 24 25
2224 2294
0 0
1/2/2 25 8
2170 776
0 0
-------------------------------------------------------------------------------
Totals 49 33
4394 3070
0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1 3 3
306 306
0 0
1/2/2 0 0
0 0
0 0
-------------------------------------------------------------------------------
Totals 3 3
306 306
0 0
===============================================================================
A:Dut-B# monitor lag 1 interval 3 repeat 1 bytes
===============================================================================
Monitor statistics for LAG ID 1
===============================================================================
Port-id Input bytes Output bytes
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
1/2/1 6100 6170
1/2/2 2514 1120
-------------------------------------------------------------------------------
Totals 8614 7290
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Delta)
-------------------------------------------------------------------------------
1/2/1 306 306
1/2/2 0 0
-------------------------------------------------------------------------------
Totals 306 306
===============================================================================
port port-id [port-id...(up to 5 total)] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]
port port-id [port-id...(up to 5 total)] atm [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm aal-5 [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvc vpi/vci [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvc vpi/vci aal-5 [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvc vpi/vci oam [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvp vpi [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvp vpi oam [interval seconds] [repeat repeat] [absolute | rate]
monitor
This command enables port traffic monitoring. The specified port’s statistical information is shown at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified ports. The subsequent statistical information listed for each interval is displayed as a delta to the previous screen.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands, but only statistical information is shown. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
the port identifier
Syntax |
port-id |
slot[/mda[/port]] or slot/mda/port[.channel] |
bundle-id: bundle-type-slot/mda.bundle-num |
||
bundle keyword |
||
bundle-num: 1 to 32 |
||
type ima, ppp |
||
bpgrp-id: bpgrp-type-bpgrp-num |
||
bpgrp keyword |
||
bpgrp-num: 1 to 24 |
||
type ima, ppp |
||
aps-id: aps-group-id[.channel] |
||
aps keyword |
||
group-id: 1 to 24 |
||
lcr-port-id: lcr-group-id/port[.channel] |
||
lcr keyword |
||
group-id: 1 to 6 |
specifies the interval for each display in seconds
specifies how many times the command is repeated
the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
the rate per second for each statistic is displayed instead of the delta
displays statistics for multi-class MLPPP bundles
monitors ATM statistics
monitors the AAL-5 statistics for the port
monitors ATM PVC statistics
monitors ATM PVC/PVP OAM statistics
monitors ATM PVP statistics
The following outputs are examples of port monitoring information.
Output Example*A:ALU-1# monitor port 1/1/1.1 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Port 1/1/1.1
===============================================================================
Input Output
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets 330161274 330161274
Packets 6229458 6229458
Errors 0 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 330162917 330162917
Packets 6229489 6229489
Errors 0 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 330164560 330164560
Packets 6229520 6229520
Errors 0 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 330166203 330166203
Packets 6229551 6229551
Errors 0 0
===============================================================================
*A:ALU-1#
A:ALU-1# monitor port bundle-ppp-1/1.13 interval 5 repeat 2 rate multiclass
===============================================================================
Monitor multiclass statistics for Bundle bundle-ppp-1/1.13
===============================================================================
Input Output
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Class 0
Octets 2990779680 2990899240
Packets 3051816 3051938
Errors 0 0
Class 1
Octets 2984941820 2990898260
Packets 3045859 3051937
Errors 0 0
Class 2
Octets 2984939860 2990899240
Packets 3045857 3051938
Errors 0 0
Class 3
Octets 2984940840 2990899240
Packets 3045858 3051938
Errors 0 0
-------------------------------------------------------------------------------
At time t = 5 sec (Mode: Rate)
-------------------------------------------------------------------------------
Class 0
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
Class 1
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
Class 2
Octets 9212 9408
Packets 9 10
Errors 0 0
Utilization (% of port capacity) 1.85 1.89
Class 3
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
-------------------------------------------------------------------------------
At time t = 10 sec (Mode: Rate)
-------------------------------------------------------------------------------
Class 0
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
Class 1
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
Class 2
Octets 9408 9408
Packets 10 10
Errors 0 0
Utilization (% of port capacity) 1.89 1.89
Class 3
Octets 9212 9408
Packets 9 10
Errors 0 0
Utilization (% of port capacity) 1.85 1.89
===============================================================================
A:ALU-1#
scada scada-id [scada-id...(up to 5 total)] [interval seconds] [repeat repeat] [absolute | rate]
monitor
This command enables traffic monitoring for a SCADA bridge or branch. The statistical information for the specified bridge or branch is shown at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified bridge or branch. The subsequent statistical information listed for each interval is displayed as a delta to the previous screen.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands, but only statistical information is shown. Monitor commands display the selected statistics according to the configured number of times at the interval specified.
specifies a bridge-id or a branch-id
specifies the interval for each display in seconds
specifies how many times the command is repeated
the raw statistics are displayed without processing. No calculations are performed on the delta or rate statistics.
the rate per second for each statistic is displayed instead of the delta