For an MPR-e configuration, the required MWA-specific parameters are configured on the 7705 SAR side using the CLI and the required non-MWA parameters are configured on the MPR-e side using the MCT.
The following MWA-specific parameters are configured on the 7705 SAR side:
1+1 HSB parameters
Epipe VLAN SAP parameters (in a mixed microwave link scenario, where there is interworking between a 7705 SAR MPR-e system and a Wavence MSS system using a TDM2Ethernet service, specific MPR-e system parameters are configured under the Epipe VLAN SAP; for more information, refer to the 7705 SAR Services Guide, ‟Configuring Epipe SAP Microwave Link Parameters for Interworking with TDM2 Ethernet”).
The following parameters are configured on the MPR-e side:
radio link parameters
QoS classification parameters
Configuration done on the MPR-e side is collected in a configuration file; this file can be saved to a 7705 SAR-8 Shelf V2 or 7705 SAR-18 using the Commit button function on the MCT or an admin>save CLI command on the 7705 SAR-8 Shelf V2 or 7705 SAR-18.