Use the following rules and syntax to configure mirror service at the mirror destination node.
The far-end ip-address command is not supported with LDP IPv6 transport tunnel. The user must reference a spoke SDP using an LDP IPv6 SDP coming from mirror source node.
In the spoke-sdp sdp-id:vc-id command, the vc-id should match that of the spoke-sdp configured in the mirror-destination context at the mirror source node.
Configuring the ingress-vc-label is optional; both Static and T-LDP are supported.
far-end ip-address [vc-id vc-id] [ing-svc-label ingress- vc-label | tldp] [icb]
no far-end ip-address
spoke-sdp sdp-id:vc-id [create] ingress-vc-label ingress-vc-label exit
no shutdown exit
exit
Mirroring is also supported with the PW redundancy feature when the endpoint spoke SDP, including the ICB, is using an LDP IPv6 tunnel.