When configuring an LSP, you must specify the IP address of the egress router in the to statement. You must also specify the primary path to be used. Secondary paths can be explicitly configured or signaled upon the failure of the primary path. All other statements are optional.
The following displays an MPLS LSP configuration.
A:ALU-1>config>router>mplp# info
----------------------------------------------
...
lsp "lsp-to-eastcoast"
to 192.0.2.41
rsvp-resv-style ff
cspf
include "red"
exclude "green"
adspec
fast-reroute one-to-one
exit
primary "to-NYC"
hop-limit 10
exit
secondary "secondary-path"
bandwidth 50000
exit
no shutdown
exit
no shutdown
----------------------------------------------
A:ALU-1>config>router>mpls#