Configuring Path Computation and Control for SR-TE LSPs

Use the following syntax to configure the path computation requests only (PCE-computed) or both path computation requests and path updates (PCE-controlled) to the PCE for a specific LSP:

CLI Syntax:

config>router>mpls>lsp>pce-computation
config>router>mpls>lsp>pce-control

The PCC LSP database is synchronized with the PCE LSP database using the PCEP PCRpt (PCE Report) message for LSPs that have the following commands enabled:

CLI Syntax:

config>router>mpls>pce-report sr-te {enable | disable}
config>router>mpls>lsp>pce-report {enable | disable | inherit}