Configuring RSVP-TE Message Pacing Parameters

RSVP-TE message pacing maintains a count of the messages that were dropped because the output queue for the egress interface was full.

Use the following CLI syntax to configure RSVP-TE message pacing parameters:

CLI Syntax:

config>router>rsvp
    no shutdown
    msg-pacing
        period milli-seconds
        max-burst number

The following example displays an RSVP-TE message pacing configuration output.

A:ALU-1>config>router>rsvp# info
----------------------------------------------
            keep-multiplier 5
            refresh-time 60
            msg-pacing
                period 400
                max-burst 400
            exit
            interface "system"
                no shutdown
            exit
            interface to-104
                hello-interval 4000
                no shutdown
            exit
            no shutdown
----------------------------------------------
A:ALU-1>config>router>rsvp#