[no] mpls [lsp lsp-name][sender source-address][endpoint endpoint-address][tunnel-id tunnel-id][lsp-id lsp-id][interface ip-int-name]
debug>router
This command enables and configures debugging for MPLS.
the name that identifies the LSP. The LSP name can be up to 32 characters long and must be unique.
specifies the system IP address of the sender
specifies the far-end system IP address
specifies the MPLS SDP ID
specifies the LSP ID
identifies the interface. The interface name cannot be in the form of an IP address. Allowed values are any string up to 32 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
[no] event
debug>router>mpls
debug>router>rsvp
This command enables debugging for specific events.
The no form of the command disables the debugging.
all [detail]
no all
debug>router>mpls>event
debug>router>rsvp>event
This command debugs all events.
The no form of the command disables the debugging.
displays detailed information about all events
frr [detail]
no frr
debug>router>mpls>event
This command debugs fast reroute events.
The no form of the command disables the debugging.
displays detailed information about reroute events
iom [detail]
no iom
debug>router>mpls>event
This command debugs MPLS IOM events.
The no form of the command disables the debugging.
displays detailed information about MPLS IOM events
lsp-setup [detail]
no lsp-setup
debug>router>mpls>event
This command debugs LSP setup events.
The no form of the command disables the debugging.
displays detailed information about LSP setup events
mbb [detail]
no mbb
debug>router>mpls>event
This command debugs the state of the most recent invocation of the make-before-break (MBB) functionality.
The no form of the command disables the debugging.
displays detailed information about MBB events
misc [detail]
no misc
debug>router>mpls>event
debug>router>rsvp>event
This command debugs miscellaneous events.
The no form of the command disables the debugging.
displays detailed information about miscellaneous events
xc [detail]
no xc
debug>router>mpls>event
This command debugs cross-connect events.
The no form of the command disables the debugging.
displays detailed information about cross-connect events
[no] rsvp [lsp lsp-name][sender sender-address][endpoint endpoint-address][tunnel-id tunnel-id][lsp-id lsp-id][interface ip-int-name]
no rsvp
debug>router
This command enables and configures debugging for RSVP.
name that identifies the LSP. The LSP name can be up to 80 characters long and must be unique.
specifies the system IP address of the sender (a.b.c.d)
specifies the far-end system IP address (a.b.c.d)
specifies the RSVP-TE tunnel ID
specifies the LSP ID
identifies the interface. The interface name cannot be in the form of an IP address. Allowed values are any string up to 32 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
auth
no auth
debug>router>rsvp>event
This command debugs authentication events.
The no form of the command disables the debugging.
displays detailed information about authentication events
nbr [detail]
no nbr
debug>router>rsvp>event
This command debugs neighbor events.
The no form of the command disables the debugging.
displays detailed information about neighbor events
path [detail]
no path
debug>router>rsvp>event
This command debugs path-related events.
The no form of the command disables the debugging.
displays detailed information about path-related events
resv [detail]
no resv
debug>router>rsvp>event
This command debugs RSVP-TE reservation events.
The no form of the command disables the debugging.
displays detailed information about RSVP-TE reservation events
rr
no rr
debug>router>rsvp>event
This command debugs refresh reduction events.
The no form of the command disables the debugging.
displays detailed information about refresh reduction events
[no] packet
debug>router>rsvp
This command enters the context to debug packets.
ack [detail]
no ack
debug>router>rsvp>packet
This command debugs ack packets.
The no form of the command disables the debugging.
displays detailed information about RSVP-TE ack packets
all [detail]
no all
debug>router>rsvp>packet
This command debugs all packets.
The no form of the command disables the debugging.
displays detailed information about all RSVP-TE packets
bundle [detail]
no bundle
debug>router>rsvp>packet
This command debugs bundle packets.
The no form of the command disables the debugging.
displays detailed information about RSVP-TE bundle packets
hello [detail]
no hello
debug>router>rsvp>packet
This command debugs hello packets.
The no form of the command disables the debugging.
displays detailed information about hello packets
path [detail]
no path
debug>router>rsvp>packet
This command enables debugging for RSVP-TE path packets.
The no form of the command disables the debugging.
displays detailed information about path-related events
patherr [detail]
no patherr
debug>router>rsvp>packet
This command debugs path error packets.
The no form of the command disables the debugging.
displays detailed information about path error packets
pathtear [detail]
no pathtear
debug>router>rsvp>packet
This command debugs path tear packets.
The no form of the command disables the debugging.
displays detailed information about path tear packets
resv [detail]
no resv
debug>router>rsvp>packet
This command enables debugging for RSVP-TE RESV packets.
The no form of the command disables the debugging.
displays detailed information about RSVP-TE RESV packets
resverr [detail]
no resverr
debug>router>rsvp>packet
This command debugs ResvErr packets.
The no form of the command disables the debugging.
displays detailed information about ResvErr packets
resvtear [detail]
no resvtear
debug>router>rsvp>packet
This command debugs ResvTear packets.
The no form of the command disables the debugging.
displays detailed information about ResvTear packets
srefresh [detail]
no srefresh
debug>router>rsvp>packet
This command debugs srefresh packets.
The no form of the command disables the debugging.
displays detailed information about RSVP-TE srefresh packets