The Path Computation Element Communication Protocol (PCEP) is one of several protocols used for communication between a wide area network (WAN) software-defined network (SDN) controller and network elements.
The 7705 SAR operates as a PCE Client (PCC) only, supporting PCC capabilities for RSVP-TE LSPs.
The following MPLS-level and LSP-level CLI commands are used to configure RSVP-TE LSPs in a router acting as a PCC. See MPLS and RSVP-TE Command Reference for command descriptions. See the PCEP Support for RSVP-TE LSPs section in the PCEP chapter for information on using these commands.
config>router>mpls>
pce-report rsvp-te {enable | disable}
config>router>mpls>lsp>
path-profile profile-id [path-group group-id]
pce-computation
pce-control
pce-report {enable | disable | inherit}
config>router>mpls>lsp-template>
pce-report {enable | disable | inherit}