Specifying Peer Parameters

Use the following CLI syntax to specify LDP peer parameters:

CLI Syntax:

config>router# ldp
    peer-parameters
        peer ip-address
            auth-keychain name
            authentication-key {authentication-key | hash-key} [hash | hash2]

Example:

config>router# ldp
config>router>ldp# peer-parameters
config>router>ldp>peer-params# peer 10.10.10.104
config>router>ldp>peer-params>peer$ authentication-key
  testuser
config>router>ldp>peer-params>peer$ exit

The following example displays the LDP peer parameters configuration output.

ALU-1>config>router>ldp# info
----------------------------------------------
           import "LDP-import"
           graceful-restart
           exit
           import "LDP-import"
           peer-parameters
                peer 10.10.10.104
                    authentication-key "nGjXyHQtCgHxbBm.kDeYdzSmPZy9KK03" hash2
                exit
           exit
           interface-parameters
                interface "test"
                exit
                interface "to-104"
                    hello 15 3
                exit
           exit
           targeted-session
                hello 5000 255
                keepalive 5000 255
                peer 10.10.10.104
                    hello 2500 100
                    keepalive 15 3
                exit
           exit
----------------------------------------------
ALU-1>config>router>ldp#