router router-instance
router service-name service-name
tools>dump
This command enables tools for the router instance.
n/a
specifies the router name and service ID
specifies the service name
bgp
tools>dump>router
This command enables dump tools for BGP.
n/a
routes [family] received [url file-url]
tools>dump>router>bgp
This command displays information for BGP routes.
n/a
displays information about received routes
specifies the family for which information is displayed
the URL of the file
fib slot-number [ipv4 | ipv6] summary
tools>dump>router
This command displays information for the FIB.
n/a
specifies the slot number, always ‟1”
specifies the IP family
displays summary information
ldp
tools>dump>router
This command enables dump tools for LDP.
n/a
fec vc-type vc-type agi agi
fec p2mp-id identifier root ip-address
fec root ip-address source ip-address group mcast-address inner-root ip-address
fec prefix ip-address[/mask]
fec root ip-address source ip-address group mcast-address [rd rd]
fec vc-type vc-type vc-id vc-id
fec p2mp-id identifier root ip-address [rd rd] inner-root ip-address
tools>dump>router>ldp
This command displays information for an LDP FEC.
specifies the VC type
specifies the attachment group identifier TLV associated with this service FEC
specifies the identifier of the LDP point-to-multipoint LSP
specifies the root IP address
specifies the source IP address
specifies the group multicast address
specifies the inner root IP address of the FEC
specifies the IP prefix and prefix length associated with the prefix FEC
specifies the route distinguisher value
specifies the VC identifier
The following output is an example of LDP FEC information.
Output ExampleA:Dut-A# tools dump router ldp fec root 10.20.1.3 source 10.0.101.10 group
192.168.1.1 inner-root 10.20.1.6
P2MP: root: 10.20.1.3, T: 7, L: 21 (InnerRoot: 10.20.1.6 T: 3, L:8, Src:
10.0.101.10, Grp: 192.168.1.1)
Create Time : 01/27/16 16:39:04.097 (elapsed: 0d 03:20:24)
Last Mod. Time: 01/27/16 16:39:04.097 (elapsed: 0d 03:20:24)
FEC Flags : Pop UprStitched
TunlIfId: 73728 (OperState : up)
LSP ID : 0
LSP ID Acct. : 0
isIngressMttm : No HasLeaf : Yes
isIngrItermdte: No
CanProgIngress: No
InPhopFrr : No
isStitchedUpr : Yes
RslvdPhop(p) : 10.20.1.2:0 (seqNum 2)
RslvdPhop(b) : 0.0.0.0:0 (seqNum 0)
pri Upstream : 10.20.1.2:0, AdvLabel 262139
mbb Upstream : None
bkp Upstream : None
AdvInLabel(p) : 262139
AdvInLabel(b) : 0
PrgInLabel(p) : 1
Num Resolved Nhops : 1
Num MBB Req. Nhops : 0
Num Programmed Nhops : 1
Programmed Nhop[01] : 0.0.0.0:0, OutLabel 0 (Leaf)(StitchedFec)
Metric : 0 Mtu : 0
Num of Peers : 1
FEC Peer: 10.20.1.2:0
Peer Flags: none (0x0)
ModTime : 01/27/16 16:39:04.097 (elapsed.: 0d 03:20:24)
->Num Egress Labels:
None
<-Num Ingress Labels:
<- (Label: 262139 Status: UsePop)
Rej Status: OK
Flow Label Tx: no, Rx: no
Flow Label Tx Sent: no, Rx Sent: no
<Resolved as CUR Upstream>
instance
tools>dump>router>ldp
This command displays information for an LDP instance.
n/a
interface [ip-int-name | ip-address]
tools>dump>router>ldp
This command displays information for an LDP interface.
n/a
specifies the interface name
specifies the IP address
memory-usage
tools>dump>router>ldp
This command displays memory usage information for LDP.
n/a
peer ip-address
tools>dump>router>ldp
This command displays information for an LDP peer.
n/a
specifies the IP address
session [ip-address |:label space] [connection | peer | adjacency]
tools>dump>router>ldp
This command displays information for an LDP session.
n/a
specifies the IP address of the LDP peer
specifies the label space identifier that the router is advertising on the interface
displays connection information
displays peer information
displays hello adjacency information
sockets
tools>dump>router>ldp
This command displays information for all sockets being used by the LDP protocol.
n/a
timers
tools>dump>router>ldp
This command displays timer information for LDP.
n/a
mpls
tools>dump>router
This command enables the context to display MPLS information.
n/a
ftn [endpoint endpoint | sender sender | nexthop nexthop | lsp-id lsp-id | tunnel-id tunnel-id | label start-label end-label]
tools>dump>router>mpls
This command displays FEC-to-NHLFE (FTN) dump information for MPLS. (NHLFE is the acronym for Next Hop Label Forwarding Entry.)
n/a
specifies the IP address of the last hop
specifies the IP address of the sender
specifies the IP address of the next hop
specifies the label switched path that is signaled for this entry
specifies the SDP ID
specifies the label range for the information dump
ilm [endpoint endpoint | sender sender | nexthop nexthop | lsp-id lsp-id | tunnel-id tunnel-id | label start-label end-label]
tools>dump>router>mpls
This command displays incoming label map (ILM) information for MPLS.
n/a
specifies the IP address of the last hop
specifies the IP address of the sender
specifies the IP address of the next hop
specifies the label switched path that is signaled for this entry
specifies the SDP ID
specifies the label range for the information dump
lspinfo [lsp-name] [detail]
tools>dump>router>mpls
This command displays LSP information for MPLS.
n/a
the LSP identifier
displays detailed LSP information
memory-usage
tools>dump>router>mpls
This command displays memory usage information for MPLS.
n/a
ospf
tools>dump>router
This command enables the context to display tools information for OSPF.
n/a
ospf3
tools>dump>router
This command enables the context to display tools information for OSPFv3.
n/a
abr [detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays area border router (ABR) information for OSPF.
n/a
displays detailed information about the ABR
area-range
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays area range information for OSPF.
n/a
asbr [detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays autonomous system boundary router (ASBR) information for OSPF.
n/a
displays detailed information about the ASBR
bad-packet interface-name
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays information about bad packets for OSPF.
n/a
displays only the bad packets identified by this interface name
leaked-routes [summary | detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays information about leaked routes for OSPF.
summary
displays a summary of information about leaked routes for OSPF
displays detailed information about leaked routes for OSPF
memory-usage [detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays memory usage information for OSPF.
n/a
displays detailed information about memory usage for OSPF
request-list [neighbor ip-address] [detail]
request-list virtual-neighbor ip-address area-id area-id [detail]
request-list [detail]
request-list neighbor [interface-name] [router-id] [detail]
request-list virtual-neighbor router-id transit-area transit-area [detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays request list information for OSPF.
n/a
displays OSPF neighbor information only for the neighbor identified by the IP address
displays OSPFv3 neighbor information only for the neighbor identified by the IP interface name
displays detailed information about the neighbor or virtual neighbor
displays OSPF information about the virtual neighbor identified by the IP address
displays OSPFv3 information about the virtual neighbor identified by the IP router identifier
displays OSPF information about the area identified by the area ID, expressed in dotted-decimal notation or as a 32-bit decimal integer
displays OSPFv3 information about the transit area identified by the router ID, expressed in dotted-decimal notation or as a 32-bit decimal integer
retransmission-list [neighbor ip-address] [detail]
retransmission-list virtual-neighbor ip-address area-id area-id [detail]
retransmission-list [detail]
retransmission-list neighbor [ip-int-name] [router-id] [detail]
retransmission-list virtual-neighbor router-id transit-area transit-area [detail]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays dump retransmission list information for OSPF.
n/a
displays OSPF neighbor information only for the neighbor identified by the IP address
displays OSPFv3 neighbor information only for the neighbor identified by the IP interface name
displays detailed information about the neighbor or virtual neighbor
displays OSPF information about the virtual neighbor identified by the IP address
displays OSPFv3 information about the virtual neighbor identified by the router identifier
displays the OSPF information about the area ID, expressed in dotted-decimal notation or as a 32-bit decimal integer
displays the OSPFv3 information about the transit area ID, expressed in dotted-decimal notation or as a 32-bit decimal integer
route-summary
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays dump route summary information for OSPF.
n/a
route-table [ip-prefix/mask] [type] [detail] [alternative]
route-table [ipv6-prefix/prefix-length] [type] [detail] [alternative]
tools>dump>router>ospf
tools>dump>router>ospf3
This command displays dump information about routes learned through OSPF.
n/a
the IPv4 prefix and mask for routes learned through OSPF
the IPv6 prefix and prefix length for routes learned through OSPFv3
the type of route table to display information about
displays detailed information about learned routes
displays LFA details
sham-bad-packet interface-name
tools>dump>router>ospf
This command displays OSPFv2 sham link bad packets.
displays only the sham link bad packets identified by this interface name
sr-adjacencies [ip-int-name | ip-address] [detail]
sr-adjacencies [remote ip-address] [detail]
tools>dump>router>ospf
This command displays OSPFv2 segment routing (SR) adjacency information.
the IP interface name, 32 characters maximum
the IP address of the neighbor
displays detailed information about SR adjacencies
sr-database [sid sid] [detail]
tools>dump>router>ospf
This command displays OSPFv2 segment routing (SR) database information.
the segment routing identifier
displays detailed information about learned routes
pim
tools>dump>router
This command enables the context to display PIM information.
n/a
iom-failures [detail]
tools>dump>router>pim
This command displays information about failures in programming IOMs.
Unlike the 7750 SR, when the maximum number of groups per node is exceeded, any additional groups are not stored at the CSM layer and an alarm is raised immediately.
n/a
displays detailed information about IOM failures
rsvp
tools>dump>router
This command enables the context to display tools information for RSVP.
n/a
neighbor [ip-address] [detail]
tools>dump>router>rsvp
This command displays neighbor information for RSVP.
n/a
the IP address of the neighbor
displays detailed information about the neighbor
psb [endpoint endpoint-address] [sender sender-address] [tunnelid tunnel-id] [lspid lsp-id]
tools>dump>router>rsvp
This command displays path state block (PSB) information for RSVP.
When a PATH message arrives at an LSR, the LSR stores the label request in the local PSB for the LSP. If a label range is specified, the label allocation process must assign a label from that range.
The PSB contains the IP address of the previous hop, the session, the sender, and the TSPEC. This information is used to route the corresponding RESV message back to LSR 1.
n/a
specifies the IP address of the last hop
specifies the IP address of the sender
specifies the SDP ID
specifies the label switched path that is signaled for this entry
rsb [endpoint endpoint-address] [sender sender-address] [tunnelid tunnel-id] [lspid lsp-id]
tools>dump>router>rsvp
This command displays RSVP Reservation State Block (RSB) information.
n/a
specifies the IP address of the last hop
specifies the IP address of the sender
specifies the SDP ID
specifies the label switched path that is signaled for this entry
segment-routing
tools>dump>router
This command enables the context to display tools information for segment routing.
tunnel
tools>dump>router>segment-routing
This command displays segment routing tunnel information.
static-route
tools>dump>router
This command enables the context to display tools information for static routes.
n/a
ldp-sync-status
tools>dump>router>static-route
This command displays the status of the LDP synchronization timers for static routes.
n/a
te-database [adv-router adv-router] [neighbor neighbor] [detail]
tools>dump>router
This command displays information for the traffic engineering database.
n/a
ip-address or isis-system-id
ip-address or isis-system-id
displays detailed information about the neighbor
isis [instance isis-instance] [level level]
tools>dump>router>te-database
This command displays information for the IS-IS traffic engineering database.
n/a
0 to 31
1 or 2
ospf [area area-id] [instance ospf-instance]
tools>dump>router>te-database
This command displays information for the OSPF traffic engineering database.
n/a
ip-address or (0 to 4294967295)
a unique integer that identifies a specific instance of a version of the OSPF protocol running in the router instance specified by the virtual router identifier