OAM SAA Commands

saa

Syntax

saa test-name [owner test-owner] {start | stop}

Context

oam

Description

This command starts or stops an SAA test.

Parameters

test-name: specifies the name of the SAA test to be run. The test name must already be configured in the config>saa>test context.

test-owner

specifies the owner of an SAA operation, up to 32 characters in length

Values: If a test-owner value is not specified, tests created by the CLI have a default owner ‟TiMOS CLI”

start: starts the test. A test cannot be started if the same test is still running or if the test is in a shutdown state. An error message and log event will be generated to indicate a failed attempt to start an SAA test run.

stop: stops a test in progress. A log message will be generated to indicate that an SAA test run has been aborted.